Hiring Subcontractors in Wisconsin: Insurance Requirements and the Real Cost of Uninsured Subs
Subcontractors are how most Wisconsin contractors grow. A general contractor in Waukesha can take on a bigger remodel by bringing in an electrician, a drywall crew, and a roofer, and a remodeler in Milwaukee can say yes to more jobs without adding full time payroll. The catch is that every sub you hire brings their own risk onto your job site, and if that sub is uninsured or underinsured, much of that risk can land back on your policy. Getting subcontractor insurance requirements right in Wisconsin protects your margins, your premium, and your relationships with owners and general contractors above you.
This guide is part of our contractor series. If you want quick definitions of the terms used below, start with our Wisconsin contractor insurance glossary. Here we focus on what to require from subs, why uninsured subs cost more than they appear to, and how to build a simple process your office can follow on every job.
Why Uninsured Subcontractors Become Your Problem
When a subcontractor has no insurance, or lets a policy lapse in the middle of a project, the claims that would have gone to their carrier have to go somewhere. In practice they usually flow uphill to the contractor who hired them. There are three main ways this happens.
Injured workers and workers compensation
Wisconsin's workers compensation law can hold a contractor responsible for injuries to the employees of an uninsured subcontractor working under them. If a laborer on your sub's crew falls from a ladder and the sub has no workers compensation, the injured worker may be able to pursue benefits through your policy. Your carrier pays the claim, and that loss can follow your experience modification for years.
Property damage and third party injury
If an uninsured sub floods a finished basement, damages a neighbor's car, or injures a homeowner, the injured party will look for the deepest pocket on the project. That is often you. Your general liability policy may defend and pay the claim, but the loss goes on your record, not theirs.
The premium audit charge
This is the cost that surprises contractors most. At your annual premium audit, the auditor reviews what you paid to subcontractors. Payments to subs who cannot show valid insurance for the period they worked are commonly treated as your own payroll, then rated at your class codes for general liability and workers compensation. A few uninsured jobs can turn into an additional premium bill months after the work is done and the money is spent.
What Insurance to Require From Every Subcontractor
Your requirements should match the size and risk of the work, and they should never be weaker than what the owner or general contractor above you requires from you. A common starting point for Wisconsin trade subcontractors looks like this:
Commercial general liability, often 1,000,000 per occurrence and 2,000,000 aggregate, with completed operations coverage that stays in force after the job ends.
Workers compensation with statutory limits for Wisconsin, plus employers liability. Sole proprietors with no employees should give you written proof of their exempt status rather than a verbal promise.
Commercial auto liability if the sub drives vehicles to or around your job site, including hired and non owned auto if their workers use personal vehicles.
Umbrella or excess liability on larger commercial work, often 1,000,000 to 5,000,000 depending on the contract.
Professional liability for subs who design anything, such as engineered fire protection systems or design build mechanical work.
Beyond the limits, ask for three contract terms on general liability: additional insured status for you and the owner, including completed operations, primary and noncontributory wording, and a waiver of subrogation. Each one keeps a claim caused by the sub's work on the sub's policy first.
For more on that last item, see our guide to waiver of subrogation for Wisconsin contractors, which explains when to sign one and when to push back.
Certificates Are Proof of a Policy, Not Proof of Coverage
Most contractors collect a certificate of insurance from each sub and file it away. That is a good start, but a certificate is a snapshot. It shows what a policy looked like on the day it was issued. It does not change the policy, and it will not tell you if the sub cancels coverage a month later.
To make certificates useful, check these items every time:
The named insured matches the business name on your subcontract and invoices exactly.
Policy dates cover the full period the sub will be on your job, not just the day they started.
Limits meet or exceed what your subcontract requires.
Your business is listed as certificate holder, and the description section references additional insured status where your contract requires it.
The certificate came directly from the sub's insurance agent, not from the sub as a forwarded PDF that could have been altered.
When the additional insured or waiver of subrogation terms really matter, ask the sub's agent for a copy of the endorsement itself. The endorsement is what grants the coverage. The certificate only describes it.
Independent Contractor or Employee? Know the Difference
Some contractors hire individuals as 1099 subs to keep payroll costs down. Wisconsin applies a multi part test to decide whether a worker is truly an independent contractor for workers compensation purposes, and the answer is not decided by the tax form you use. Factors include whether the person maintains a separate business, holds their own insurance, controls how the work is done, and works for multiple customers.
If a worker you treat as a subcontractor does not meet the test, they may be considered your employee for workers compensation. That affects both claims and your audit. Before you pay anyone as a sub, confirm they operate as a real business with their own coverage, or put them on your payroll and your policy.
Our Wisconsin workers compensation page explains how coverage, class codes, and experience modification work for contractors, so you can see how these choices affect your rate.
A Simple Subcontractor Insurance Process for Your Office
The contractors who avoid audit surprises and uninsured claims are rarely the ones with the biggest office staff. They are the ones with a consistent routine. Here is a process that works for a small Wisconsin contracting business:
Put written insurance requirements in every subcontract, including limits, additional insured, primary and noncontributory, and waiver of subrogation.
Collect a current certificate before the sub sets foot on site. No certificate, no start date.
Track expiration dates in a spreadsheet or your project management system, and request renewals 30 days before each policy expires.
Hold final payment until you have a certificate that was valid for the entire period of work.
Keep certificates organized by sub and by year so you can hand them to your auditor in one file.
Review your subcontract template with your agent once a year, or whenever a large client changes its requirements.
This routine takes minutes per job and can save thousands at audit time. It also makes you a stronger subcontractor yourself, because general contractors notice when your paperwork is clean.
How MM Insurance Associates Helps Contractors Manage Subs
MM Insurance Associates has worked with Wisconsin contractors from our New Berlin office since 1997. We review subcontract insurance language, check the certificates your subs send you, and make sure your own policy is built for the way you actually use subs. Learn more about our business insurance for Wisconsin contractors, or reach out before your next big job and we will walk through your requirements with you.
Frequently Asked Questions
Am I responsible if my uninsured subcontractor's employee gets hurt in Wisconsin?
You can be. Wisconsin workers compensation law can make a contractor responsible for injuries to employees of an uninsured subcontractor working under them. Collecting proof of workers compensation from every sub with employees is the best protection.
Why did my premium audit charge me for subcontractors?
Auditors commonly treat payments to subcontractors who cannot show valid insurance as your own payroll. That amount is then rated at your class codes, which can produce an additional premium bill after the policy ends.
What insurance limits should I require from subcontractors?
A common baseline is 1,000,000 per occurrence and 2,000,000 aggregate in general liability, statutory workers compensation, and commercial auto liability. Your requirements should never be lower than what the owner or general contractor requires from you.
Is a certificate of insurance enough to prove a sub is covered?
A certificate shows the policy existed when it was issued, but it does not grant coverage or alert you to a cancellation. Verify dates and limits, get it from the sub's agent, and request the endorsements when additional insured status matters.
Can a sole proprietor subcontractor skip workers compensation?
A sole proprietor with no employees is generally not required to carry it, but you should get written documentation of that status. If the person does not meet Wisconsin's independent contractor test, they may be treated as your employee.
How often should I collect new certificates from subcontractors?
Collect one before work starts and a new one whenever a policy renews during the job. Tracking expiration dates and requesting renewals 30 days ahead keeps your files complete for audit.
Protect Your Business From Uninsured Subcontractor Risk
Every sub you hire should strengthen your business, not quietly add to your risk. Call MM Insurance Associates at (262) 754-4736 to review your subcontract requirements, your certificates on file, or your own contractor insurance program.
You can also get started online through our customer portal and a licensed agent will follow up with the details that fit your operation.


Comments